+Call us +(86)18678002095 |   WHATSAPP +(44)7388786629 international support + MON-FRI. 9:00 - 19:00 +8GTM
English Deutsche French Portuguese Chinesea Spanish Italian Arabic Dutch Hindi
Language Options

Control Module | Control Panel Function

Products catalog

Manufactures
Sorting by power (gas, biogas, diesel)


Gas Generators
Diesel Generators
Biogas Generators
Marine Diesel Generators
Plant & Equipment
Diesel water pumps
Control panel Module
Control Panel Function | Under/over generator frequency | GENERATOR
Protection Circuit | Failed to reach loading voltage | Voltage (L-N)
WARNING | ELECTRICAL TRIP | Current(L1-L2-L3)
Battery charge failure | Generator over current | Frequency
Low battery | voltage Instruments | AMAINS
SHUT DOWNS | ENGINE | Voltage (L-L, L-N)
Fail to start| Engine speed | Remote start
Emergency stop | Oil pressure | Loads share
Low oil pressure | Coolant temperature | Parallel operation
High engine temperature | Run time
Over /Under speed | Battery volts

All Control Panel »

DSE8610 Synchronising & Load Sharing Control Module:



The DSE8610 MKII is an easy to use Synchronising Auto Start Control Module suitable for use in a multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines. The DSE8610 MKII monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.

System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder.

The event log will record 250 eventsto facilitate easy maintenance, and an extensive number of fixed and flexible monitoring, metering and protection features are included.

Designed to offer increased built in support for active sensors for 0 V to 10 V & 4 mA to 20 mA.
Comprehensive communication and system expansion options are available.

Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers and alarms. With all communication ports capable of being active at the same time, the DSE8610 MKII is ideal for a wide variety of demanding load share applications.

KEY FEATURES & BENEFITS

  1. Mains (utility) failure detection
  2. Comprehensive synchronising & loadsharing capabilities
  3. Built-in governor and AVR control
  4. Base load (kW export) functionality
  5. Positive & negative kVAr export control
  6. Peak lopping & shaving functionality
  7. Mains (utility) power (kW, kV Ar, kV A & pf) monitoring
  8. Mains (utility) de-coupling protection
  9. Generator power (kW, kV Ar, kV A & pf) monitoring
  10. Overload (kW & kV Ar) protection
  11. Reverse power (kW & kV Ar) protection
  12. Mains (utility) kW export protection
  13. Unbalanced load protection
  14. Independent earth fault protection
  15. Advanced integral PLC editor
  16. 11 Configurable inputs
  17. 8 Configurable outputs
  18. Configurable flexible sensor inputs
  19. DSENet ® expansion compatibility
  20. User configurable RS232, RS485 and Ethernet communications via USB
  21. 4 Line back-lit LCD text display
  22. LED and LCD alarm indication
  23. Configurable display languages
  24. USB connectivity
  25. Customisable status screens
  26. Five key menu navigation
  27. 3 Configurable maintenance alarms
  28. Multiple date and time run scheduler
  29. Manual fuel pump control
  30. Fuel usage monitor and low fuel level protection
  31. Charge alternator failure protection
  32. Load switching (load sheddingand dummy load control)
  33. Configurable event log (250)
  34. Backed up real time clock
  35. Remote SCADA monitoring via various DSE software applications
  36. MODBUS RTU & TCP support
  37. User configurable MODBUS Pages
  38. Advanced SMS control and fault messaging (additional GSM modem required)
  39. Easy access diagnostic pages including modem diagnostic pages
  40. Data logging and trending
  41. CAN, MPU and Frequency speed sensing
  42. Tier 4 CAN engine support
  43. 'Protections disabled' feature
  44. Front panel editing with PIN protection
  45. Fully configurable using DSE Configuration Suite PC software


KEY BENEFITS

  1. Compatible with DSE8003
  2. 132 x 64 pixel ratio display for clarity
  3. Real-time clock provides accurate event logging
  4. Ethernet communication, provides builit in advanced remote monitoring.
  5. Can be integrated into building management systems (BMS) and programmable logic control (PLC)
  6. Increased input and output expansion capability via DSENet ®
  7. Licence-free PC software
  8. IP65 rating (with supplied gasket) offers increased resistance to water ingress
  9. Advanced Internal PLC editor allows user configurable functions to meet specific application requirements.

AGC 150

AGC 150 is a controller containing all necessary functions for protection and control of a genset, a mains breaker, and a bus tie breaker. It can be used as a single controller for one genset, or a number of controllers can be connected in a complete power management system for synchronising projects, island applications or running parallel to mains.
AGC 150 is an economical solution for genset builders, who need a flexible generator protection and controller for small to large genset applications. AGC 150 contains all necessary 3-phase measuring circuits, and all values and alarms are presented on the sunlight readable LCD display screen

Easy setup
Gensets connected via CAN bus are easily set up for parallel operation as the controllers automatically detect each other at the CAN network. If you at a later stage connect more gensets, the controller automatically identifies and connects them via CAN bus, and application configuration is possible via the display.

Easy and safe to use
Get access to important genset information quickly via the sunlight readable LCD. The controller features illuminated buttons that smoothly guide the operator and make it very easy and intuitive to operate. Only buttons relevant for a function are visible to the user. Get easy access to the most common functions with configurable shortcuts.

The AGC 150 provides up to three levels (customer, service, and master) of password-protected and role-based access. Configure parameters for each level and have only relevant parameters displayed.
Built to last - also in green energy applications. The AGC 150 comes with uncompromising quality. The controller is made of robust materials and is built to last. It has undergone several tests showing that it stands wear and tear in all types of harsh environments. Also, the controller is suitable for PV-Diesel hybrid solutions and also meets Tier 4 Final requirements

Genset controller features

  1. -40 degree support
  2. Adapting controls (Controllers show only relevant buttons)
  3. Additional I/O modules support (CANbus based CIO)
  4. Analog Inputs / Analog Outputs
  5. Analog inputs support resistance, current and voltage
  6. Analogue loadshare
  7. AOP 2 support
  8. Automatic Mains Failure sequence
  9. CAN telegrams between controllers
  10. Changable operation mode (multiple modes in one software DEIF PMS ecosystem compatible with AGC-4, AGC-4 Mk II, AGC 150, AGC 200, ASC-4
  11. Digital & analog governor support (Isochronous and droop)
  12. Emission control with force regeneration and SOOT alarm
  13. Emulation for easy training and FAT
  14. Engine CANbus
  15. Engine derate functionality
  16. Ethernet
  17. Changeable controller type
  18. Close Before Excitation / Run-up synchronization from 6 seconds
  19. DEIF digital AVR DVC550 support
  20. Tier4 final/stage5
  21. UL approved
  22. Front mount
  23. Fuel pump logic (after filler)
  24. Hybrid EMS support (via ASC-4)
  25. Inputs/ Outputs
  26. Inverse time over-current (ANSI 51) False
  27. Load add/ shedding support
  28. Load control and Heavy consumer support (via ALC-4)
  29. Multi purpose PID
  30. Multi-master Power Management
  31. PLC logic
  32. RS485
  33. Synchronization
HAITAI POWER - WHY CHOOSE US

OVER 15 YEARS OF SUCCESSFUL SALES ON THE GLOBAL MARKET. DIRECT DELIVERY FROM YOUR FACTORY, NO WAITING AND MINIMUM PRICE


MULTIPLE CATEGORY
More than 40 different categories for you to choose from

LARGE STOCK
More than 3500 generators and power equipment are waiting for you to stock for immediate delivery

FAST SHIPPING
Fast shipping time to any country in the world. Door to door service is available.

oDM/OEM
Any factory modification to your requirements. Including your logo and/or Pantone colour of choice.

WARRANTY
1-3 year warranty and lifetime technical service and spare parts

CUSTOMIZED SERVICE
Technical Support and friendly service 24/7

HAITAI POWER® Diesel & gas gensets ¹ latest arrivals

HAITAI POWER ® Diesel & gas gensets the best offers

HAITAI POWER ® BEST SELLERS» Diesel & gas gensets

HAITAI POWER® LATEST NEWS


Special price on Cummins generators from 25 to 350KVA
Cummins diesel generators can be applied as main power or emergency generator.
The sets design for continuous power supply in view of its advanced technology ,reliable performance and long working hours.

  READ MORE  

English - Deutsche - French - Dutch - Portuguese - Spanish - Italian - Chinese - Korea - Japan - turkish - Arabic - thai - vietnamese - Hindi - Hindi

Download: Gas Generator stock list - PDF | BioGas Generator stock list - PDF | Land Use Diesel Generator stock list - PDF | Specifications and manuals
Type generators: Cummins Gas | Weifang Ricardo Gas| Weichai Gas| Doosan Gas| Man Gas | Cummins Diesel | Perkins Diesel | WEICHAI Diesel| DOOSAN Diesel | Weifang Ricardo Diesel | Yuchai Diesel | Deutz Diesel Air Cooled | Kubota Diesel | Cummins Marine Diesel | Weichai Marine Diesel
Manufacturers: Cummins | Weichai | Doosan | Weifang | Baudouin | MAN | Perkins | Yuchai | Deutz | Kubota | Taiguo | Haitai     sitemap.xml for Google
Sorting by power (gas, biogas, diesel) 4000kW : 2000kW : 1800kW : 1600kW : 1500kW : 1475kW : 1350kW : 1200kW : 1100kW : 1000kW : 900kW : 800kW : 730kW : 728kW : 720kW : 680kW : 640kW : 600kW : 580kW : 570kW : 550kW : 520kW : 500kW : 470kW : 460kW : 450kW : 420kW : 400kW : 360kW : 350kW : 330kW : 320kW : 300kW : 280kW : 275kW : 260kW : 250kW : 240kW : 230kW : 220kW : 200kW : 180kW : 160kW : 150kW : 120kW : 110kW : 100kW : 90kW : 80kW : 75kW : 70kW : 60kW : 55kW : 50kW : 45kW : 36kW : 35kW : 32kW : 30kW : 28kW : 26kW : 25kW : 24kW : 22kW : 20kW : 17kW : 16kW : 15kW : 12kW : 10kW : 9kW : 7kW : 5kW
Haitai Power® reserves the right to make modifications in the specification at any time without prior notice.

JICHAI, CUMMINS, PERKINS, WEICHAI POWER, DEUTZ, DOOSAN, WEICHAI, STAMFORD, Kubota

  My Cart


Save any items in your bag and when you're ready, just order.
CLICK HERE